201 ENT PVC Cement

Part #


No items found.
No items found.

E Z Weld ENT blue cement is specialty formulated medium bodied, fast set, high strength cement. When joining large diameter pipe & fittings the use of primers is highly recommended.

Specialty Cements
32°F - 110°F
SCH 40:
up to 6"
SCH 80:

Available Sizes

2 oz.

118 ml Can

4 oz.

237 ml Can

16 oz.

473 ml Can

32 oz.

946 ml Can

128 oz.

3.78 l Can


This cement is good for joining CPVC pipes and fittings up to 6” (110mm) diameter interference fit for pressure applications. This cement is approved for hot (up to 180°F/82°C) and cold water pressure systems. It may be used for non-pressure applications such as drain, waste, vent sewer gas, conduit etc. For superior joint use with E-Z Weld Primer, Purple (No. 212) Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy, lumpy or jelly like.

Usage Temperature

32°F - 110°F

Storage Temperature

45°F - 110°F

Shelf Life

3 Years (unopened can)

Safety Precautions

Ensure adequate ventilation to avoid vapor build up which may cause flash fire. Vapor build up may also cause dizziness, headaches or eye watering. If symptoms are experienced use respiratory protection (NOISH/MSHA TC-23C or equivalent) or leave are and provide more fresh air. Avoid contact with eyes, skin and clothing by use of safety glasses and gloves. Professionals should consult ASTM Standard F402-18 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings. Professional users should also read the Safety Data Sheet for the product.


Flush eyes thoroughly with water for 15 minutes. Get immediate medical attention.


If breathing is difficult vacate to fresh air. If breathing problems persist seek immediate medical attention.


If swallowed give 1 or 2 glasses of water immediately, call physician, hospital or poison control immediately. DO NOT INDUCE VOMITING.

Quality Assurance

Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. F493)

Hydrostatic Burst

400 PSI after 2 hour cure time at 73° F

500 PSI (3.45 Mpa) after 16 hour cure time at 73°F (23°C)

Lap Shear

250 PSI (2.76 Mpa) after 2 hour cure time at 73°F (23°C)

500 PSI (3.45 Mpa) after 16 hour cure time at 73°F (23°C)

900 PSI (6.20 Mpa) after 72 hour cure time at 73°F (23°C)

Shipping Information

Material packaged in less than a liter size is exempted under "Limited Quantity Rules" by DOT. These packages may be shipped with the description ORM-D Consumer Commodity. Packages shipped under this description are not subject to shipping paper requirements for flammable materials. For a liter and larger sizes (gallon and above container):

Flammable Class
Packing Group
Proper Shipping Name
UN Number