Description & Application
E-Z Weld Chemical Resistant Orange is a heavy bodied, medium set CPVC Solvent Cement. This cement is part of our Industrial Grade line of products. This cement is formulated for use on all classes and schedules of PVC/uPVC and CPVC pipe and fittings with interference fit up to 12" (315 mm) diameter. It may also be used on small diameter pipes and fittings. Industrial strength cement specifically designed for use on PVC / uPVC and CPVC piping systems carrying acids, bases, salts and hypochlorites. When joining large diameter pipe & fittings the use of primers is highly recommended.
Orange, Heavy Body, CPVC cement for use on pipe and fittings up to 12″ (315 mm) diameter. Specifically designed for use on PVC/uPVC and CPVC piping systems requiring chemical resistance to caustics including hypochlorine, mineral acids and aqueous salt solutions. For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label.
The ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55°F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs.
3 years (unopened can)
Certification / Industry Listings
This product is tested, certified and approved by NSF International for use on drain, waste and potable water systems. It is also listed by the International Association of Plumbing & Mechanical Officials (IAPMO). It carries the Uniform Plumbing Code (UPC) seal. This cement meets ASTM Standard F493 and D2846.
hour cure time at
hour cure time at
Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. F493)
Hydrostatic Burst Strength:
- 400 psi (2.76 Mpa) after 2 hour cure time at 73°F (23°C)
- 200 psi (1.38 Mpa) after 16 hour cure time at 180°F (82°C)
*Note: Packaging sizes subject to availability. Please check with your distributor or contact E-Z WELD.
|SIZE||1/4 PINT CAN||1/2 PINT CAN||PINT CAN||QUART CAN||GALLON CAN||50 GALLON CAN|
|Units per Case||24||24||12||12||6|
|Weight per Case - lb||9.5||16||15.5||28||54|
|Weight per Case - kg||4.32||7.27||7.05||12.73||24.55|
|Cubic Feet per Case||0.260||0.420||0.404||0.762||1.221|
|Cubic Meter per Case||0.007||0.012||0.011||0.022||0.035|
|Cases per Pallet||145||90||88||56||27|
Material packaged in less than a liter size is exempted under "Limited Quantity Rules" by DOT. These packages may be shipped with the description ORM-D Consumer Commodity. Packages shipped under this description are not subject to shipping paper requirements for flammable materials. For a liter and larger sizes (gallon and above container):
- Proper Shipping Name: Adhesive
- Flammable Class: 3
- UN Number: UN 1133
- Packing Group: PG II