220 – E-Z Weld

E-Z Weld Transition Cement is a medium bodied, fast set PVC Solvent Cement. This cement is formulated for use on non-pressure transition joints between ABS and PVC/uPVC pipes and fittings.

Application

Green, medium body, ABS to PVC / uPVC transition cement used for non-pressure transition joints for schedule 40 pipe and joints up to 6” (160 mm) diameter
Not for schedule 80
Can be used for sewer, conduit and DWV
Meets ASTM D3138

For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label.

Application temperature:

32° _F

—

110° _F

Storage temperature:

45° _F

—

110° _F

ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55°F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs.

Physical Properties

Color:

Shelf Life:

3 years (unopened can)

Certification / Industry Listings

This product is tested, certified and approved by NSF International for use on drain, waste and potable water systems. It is also listed by the International Association of Plumbing & Mechanical Officials (IAPMO). It carries the Uniform Plumbing Code (UPC) seal. This cement meets ASTM Standard D3138.

Quality Assurance

Hydrostatic Burst:

200

PSI after

hour cure time at

73° _F

Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. D2564)

Lap Shear:

600 psi (4.1 Mpa) after 72 hour cure time at 73°F (23°C)

Lap Shear:

600 psi (4.1 Mpa) after 72 hour cure time at 73°F (23°C)

Hydrostatic Burst Strength:

200 psi (1.4 Mpa) after 72 hour cure time at 73°F (23°C)

*Note: Packaging sizes subject to availability. Please check with your distributor or contact E-Z WELD.

SIZE	1/4 PINT CAN	1/2 PINT CAN	PINT CAN	QUART CAN	GALLON CAN
Fluid oz	4	8	16	32	128
Liters	0.12	0.24	0.47	0.95	3.78
Units per Case	24	24	12	12	6
Weight per Case - lb	9.5	16	15.5	28	54
Weight per Case - kg	4.32	7.27	7.05	12.73	24.55
Cubic Feet per Case	0.260	0.420	0.404	0.762	1.221
Cubic Meter per Case	0.007	0.012	0.011	0.022	0.035
Cases per Pallet	145	90	88	56	27

Material packaged in less than a liter size is exempted under "Limited Quantity Rules" by DOT. These packages may be shipped with the description ORM-D Consumer Commodity. Packages shipped under this description are not subject to shipping paper requirements for flammable materials. For a liter and larger sizes (gallon and above container):

Proper Shipping Name: Adhesive
Flammable Class: 3
UN Number: UN 1133
Packing Group: PG II