E-Z Weld CPVC Orange is a medium bodied, fast-set CPVC Solvent Cement. It is formulated for use on CPVC pipe & fittings, including copper tube sizes up to 6” (110 mm) diameter interference fit.
Application
This cement is good for joining CPVC pipes and fittings up to 6” (110 mm) diameter interference fit for pressure applications. This cement is approved for hot (up to 180°F/82°C) and cold water pressure systems. It may be used for non-pressure applications such as drain, waste, vent sewer gas, conduit etc.  For superior joint use with E-Z Weld Primer, Purple (No. 212) Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy, lumpy or jelly like.   Always follow instructions on the label.
Application temperature:
32° F
110° F
Storage temperature:
45° F
110° F
Physical Properties
Color:
Shelf Life:
3 years (unopened can)
Certification / Industry Listings
This product is tested, certified and approved by NSF International for use on drain, waste and potable water systems. It is also listed by the International Association of Plumbing & Mechanical Officials (IAPMO). It carries the Uniform Plumbing Code  (UPC) seal. This cement meets ASTM Standard F493 and D2846.
Quality Assurance
Hydrostatic Burst:
400
PSI after
2
hour cure time at
73° F
200
PSI after
2
hour cure time at
180° F
Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept.  All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std.  F493)
Hydrostatic Burst Strength:
  • 400 psi (2.76 Mpa) after 2 hour cure time at 73°F (23°C)
  • 200 psi (1.38 Mpa) after 16 hour cure time at 180°F (82°C)

*Note: Packaging sizes subject to availability. Please check with your distributor or contact E-Z WELD.

SIZE 1/4 PINT CAN 1/2 PINT CAN PINT CAN QUART CAN GALLON CAN
Fluid oz 4 8 16 32 128
Liters 0.12 0.24 0.47 0.95 3.78
Units per Case 24 24 12 12 6
Weight per Case - lb 9.5 16 15.5 28 54
Weight per Case - kg 4.32 7.27 7.05 12.73 24.55
Cubic Feet per Case 0.260 0.420 0.404 0.762 1.221
Cubic Meter per Case 0.007 0.012 0.011 0.022 0.035
Cases per Pallet 145 90 88 56 27
Material packaged in less than a liter size is exempted under "Limited Quantity Rules" by DOT. These packages may be shipped with the description ORM-D Consumer Commodity. Packages shipped under this description are not subject to shipping paper requirements for flammable materials. For a liter and larger sizes (gallon and above container):
  • Proper Shipping Name: Adhesive
  • Flammable Class: 3
  • UN Number: UN 1133
  • Packing Group: PG II