E-Z Weld Pool Pro is a medium bodied, fast set PVC Solvent Cement. This cement is formulated for use on PVC pipes and fittings.  It may also be used on small diameter pipes and fittings. This cement is specially formulated for applications where working conditions may not be dry. Making a joint while water is present is very risky. Care must be taken and water from the joining surface should be removed. If moisture is still present on the joining surface, work quickly and a longer cure time should be allowed. When joining large diameter pipe & fittings the use of primers is highly recommended.
Application
Blue, Medium Body PVC / uPVC cement for use on up to 6″ (150 mm) diameter for Schedule 40 and 4" (100 mm) for Schedule 80. Formulated for wet conditions also suitable for plumbing, pool and spa industry pressure / non pressure applications and electrical conduit.  For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like.   Always follow instructions on the label.
Application temperature:
32° F
110° F
Storage temperature:
45° F
110° F
ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55°F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs.
Physical Properties
Color:
Shelf Life:
3 years (unopened can)
Certification / Industry Listings
This product is tested, certified and approved by NSF International for use on drain, waste and potable water systems. It is also listed by the International Association of Plumbing & Mechanical Officials (IAPMO). It carries the Uniform Plumbing Code  (UPC) seal. This cement meets ASTM Standard D2564.
Quality Assurance
Hydrostatic Burst:
400
PSI after
2
hour cure time at
73° F
Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept.  All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std.  D2564

Lap Shear:

  • 250 psi (2.76 Mpa) after 2 hour cure time at 73°F (23°C)

  • 500 psi (3.45 Mpa) after 16 hour cure time at 73°F (23°C)

  • 900 psi (6.20 Mpa) after 72 hour cure time at 73°F (23°C)

Lap Shear:
  • 250 psi (2.76 Mpa) after 2 hour cure time at 73°F (23°C)
  • 500 psi (3.45 Mpa) after 16 hour cure time at 73°F (23°C)
  • 900 psi (6.20 Mpa) after 72 hour cure time at 73°F (23°C)
Hydrostatic Burst:
  • 400 psi (2.76 Mpa) after 2 hour cure time at 73°F (23°C)

*Note: Packaging sizes subject to availability. Please check with your distributor or contact E-Z WELD.

SIZE 1/4 PINT CAN 1/2 PINT CAN PINT CAN QUART CAN GALLON CAN
Fluid oz 4 8 16 32 128
Liters 0.12 0.24 0.47 0.95 3.78
Units per Case 24 24 12 12 6
Weight per Case - lb 9.5 16 15.5 28 54
Weight per Case - kg 4.32 7.27 7.05 12.73 24.55
Cubic Feet per Case 0.260 0.420 0.404 0.762 1.221
Cubic Meter per Case 0.007 0.012 0.011 0.022 0.035
Cases per Pallet 145 90 88 56 27
Material packaged in less than a liter size is exempted under "Limited Quantity Rules" by DOT. These packages may be shipped with the description ORM-D Consumer Commodity. Packages shipped under this description are not subject to shipping paper requirements for flammable materials. For a liter and larger sizes (gallon and above container):
  • Proper Shipping Name: Adhesive
  • Flammable Class: 3
  • UN Number: UN 1133
  • Packing Group: PG II