222 PVC CEMENT

Part #

222

No items found.
No items found.

E-Z Weld Wet Weld is a medium bodied, fast set PVC Solvent Cement. This cement is formulated for use on PVC pipes and fittings. It may also be used on small diameter pipes and fittings. A cement offered for wet conditions and or quick pressurization. Making a joint while water is present is very risky. Care must be taken and water from the joining surface should be removed. If moisture is still present on the joining surface, work quickly and a longer cure time should be allowed. When joining large diameter pipe & fittings the use of primers is highly recommended.

Blue
Medium
body
PVC Cements
32° F - 110° F
SCH 40:
up to 6"
SCH 80:
up to 4"

Available Sizes

2 oz.

118 ml Can

4 oz.

237 ml Can

16 oz.

473 ml Can

32 oz.

946 ml Can

128 oz.

3.78 l Can

Application

ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55°F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs.

Usage Temperature

32° F - 110° F

Storage Temperature

45° F - 110° F

Shelf Life

3 years (unopened can)

Safety Precautions

Ensure adequate ventilation to avoid vapor build up which may cause flash fire. Vapor build up may also cause dizziness, headaches or eye watering. If symptoms are experienced use respiratory protection (NOISH/MSHA TC 23 c or equivalent) or leave are and provide more fresh air. Avoid contact with eyes, skin and clothing by use of safety glasses and gloves. Professionals should consult ASTM Standard F 402-93 Safe Handling of Solvent Cements, Primers and Cleaners Used for Joining Thermoplastic Pipe and Fittings. Professional users should also read the Material Safety Data Sheet for the product.

Eyes

Flush eyes thoroughly with water for 15 minutes. Get immediate medical attention.

Inhalation

If breathing is difficult vacate to fresh air. If breathing problems persist seek immediate medical attention.

Internal

If swallowed give 1 or 2 glasses of water immediately, call physician, hospital or poison control immediately. DO NOT INDUCE VOMITING.

Quality Assurance

Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. D2564

Hydrostatic Burst

400PSI after2hour cure time at 73° F

500 psi (3.45 Mpa) after 16 hour cure time at 73°F (23°C)

Lap Shear

250 psi (2.76 Mpa) after 2 hour cure time at 73°F (23°C)

500 psi (3.45 Mpa) after 16 hour cure time at 73°F (23°C)

900 psi (6.20 Mpa) after 72 hour cure time at 73°F (23°C)

Shipping Information

Ensure adequate ventilation to avoid vapor build up which may cause flash fire. Vapor build up may also cause dizziness, headaches or eye watering. If symptoms are experienced use respiratory protection (NOISH/MSHA TC 23 c or equivalent) or leave are and provide more fresh air. Avoid contact with eyes, skin and clothing by use of safety glasses and gloves. Professionals should consult ASTM Standard F 402-93 Safe Handling of Solvent Cements, Primers and Cleaners Used for Joining Thermoplastic Pipe and Fittings. Professional users should also read the Material Safety Data Sheet for the product.

Flammable Class
3
Packing Group
PG II
Proper Shipping Name
Adhesive
UN Number
UN 1133