209 Industrial Grade Cement

 

E Z Weld Industrial Grade is a medium bodied medium set PVC Solvent Cement. It is cloudy in color but dries clear. This cement is formulated to give good gap filling properties for pipes and fittings up to 12 “ diameters. It provides consistently strong joint if used correctly.

 

Application

This cement is good for joining Schedule 40 & 80 PVC pipes and fittings up to12” diameter interference fit. It is approved for cold water pressure applications. It may also be used for non-pressure applications such as drain, waste, vent, sewer, conduit, gas etc. up to 14” diameter interference fit.  For superior joint use with EZ Weld Primer, Purple (No.212) Clear or  (No. 211). Never add thinner or additive. Never use the cement if it is stringy, lumpy or jelly like.

 

Always follow instructions on the label.

 

Application temperature:                         32 degree F to 110 degree F.

Storage temperature:                              45 degree F to 110 degree F.

CURE TIME GUIDE:

 

The ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55 degrees F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs.

Temperature Range –  Degree F	Pipe size ½” to 1 ¼”			Pipe size 1 ½” to 3”			Pipe size 3” to 6”
	Up to 180 psi	181 psi to 370 pis		Up to 180 psi	181 psi  to 315 psi		Up to 180 psi	181 psi to 315 psi
60 to 100	1 Hr	6 Hrs		2 Hrs	12 Hrs		6 Hrs	24 Hrs
40 to 60	2 Hrs	12 Hrs		4 Hrs	24 Hrs		12 Hrs	48 Hrs
10 to 40	8 Hrs	12 Hrs		16 Hrs	96 Hrs		48 Hrs	8 Days

 

Physical Properties

• Color: Cloudy
• Body: Medium
• Set: Medium
• Shelf Life:3 Years-unopened can

Quality Assurance

Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept.  A sample of every batch is taken and kept at least one year. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. D 2564)

 

Lap Shear:                    250 psi after 2 hours cure time   

500 psi after 16 hours cure time

900 psi after 72 hours cure time

Hydrostatic Burst:          400 psi after 2 hours cure time